This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service. Translate
07-20-2005 01:35 PM
Does anyone know how to draw 3d acme threads in autocad 2006? I could use a lsp routine or just another method.
This could be threads from 1.25" diam. to 2.5" diameter.
07-20-2005 02:45 PM
Draw a profile of the treads, copy or array them to the tread count that you
need, Join it to form a closed pline and revolve it around the center of the
bolt.
07-20-2005 07:29 PM
>Draw a profile of the treads, copy or array them to the tread count that you need, Join it to form a closed pline and revolve it around the center of the bolt.
Jason,
I can't figure that out from your description - can you post an example.
JD
07-21-2005 08:59 AM
In your instructions the threads would not be joined together.
I need to know how to draw so the threads would be actually joined. This would require a spiral effect as in a bolt where the thread actually spirals upward as one complete thread.
Can you explain how to do this?
07-21-2005 09:27 AM
I went through this a while ago in architecture trying to draw a curved ramp.
It turns out that autocad won't really do helical forms. Of course that was in 2002, we're on 2006 now and I haven't tried since.
07-21-2005 09:37 AM
http://management.cadalyst.com/cadman/article/articleDetail.jsp?id=101140
07-21-2005 09:44 AM
No lofts or helixes in standard acad yet. You'll still have to pay more for
those features or fake it like I did in the attachment earlier. Do you
really need that much detail in a thread? Are you planning on casting it? Or
are you just curious and wanted to try it.
07-21-2005 11:53 AM
Jason, thanks for the lsp file. I tried to open it but it wont open.
I think it must be an older version. I am using autocad 2002.
What do you think?
07-21-2005 11:55 AM
I might use it if i can find it. Either I can draw it or use a lsp
program.
So far I can only do fake 3d acme threads. I would prefer the
real thing.
07-21-2005 12:24 PM
> would prefer the real thing.
If you could post the specs maybe someone will model it for you in a true 3D modeler. (see attached)
Or you can fake it if your work doesn't require anything more than pretty pictures...
http://discussion.autodesk.com/thread.jspa?threadID=415227
http://discussion.autodesk.com/thread.jspa?messageID=4785025
07-21-2005 12:29 PM
>lsp file. I tried to open it but it wont open.
I think it must be an older version. I am using autocad 2002.
Not a lsp file - it is a zipped file. After downloading RMB on the file name and select extract. Or download WinZip to extract. Here is an example of an ACME that should open in v2002.
Of course this is an editable solid unlike the faceted mesh in the Cadalyst article.
07-22-2005 08:18 AM
[quote]
Or you can fake it if your work doesn't require anything more than pretty pictures...[/quote]
It's funny that a program designed to make pretty pictures like 3dsmax will accurately model threads, but a program designed to be accurate wont.
07-22-2005 09:15 AM
What does RMB mean? Can you explain again please?
07-22-2005 10:01 AM
Right Mouse Button
http://www.acronymfinder.com/
07-22-2005 11:24 AM
There are lot of files in this zip file. I don't find any lisp
files in it. I am looking for a lisp file that will do 3d acme threads.
07-22-2005 11:47 AM
>There are lot of files in this zip file.
Huh? What are the file names you see?
>I am looking for a lisp file that will do 3d acme threads.
Solid or surface?
07-22-2005 06:11 PM
I need a lisp file that will do solid 3d acme threads.
For some reason this file is a solid drawing of something
that looks like a T-Bolt.
07-23-2005 09:25 AM
>For some reason this file is a solid drawing of something
that looks like a T-Bolt.
You didn't post a 2D drawing of what you are trying to do.
I do not know of any lisp that will create a 3D ACME - but you can slice and union these as needed.
http://discussion.autodesk.com/thread.jspa?threadID=417538
The Machinery's Handbook lists 7 sizes between 1.75 and 2.5 inches.
If you follow the 3D topics on the forum you will find that even the OLD-timers have difficulty creating solids in AutoCAD that match real parts.
http://discussion.autodesk.com/thread.jspa?threadID=414216
thomasrethe1998.blogspot.com
Source: https://forums.autodesk.com/t5/autocad-forum/3d-acme-threads/td-p/1384739
0 Response to "How to Draw Acme Threads in Autocad"
Enregistrer un commentaire